KPC 30T Electric Flat Carriage
The KPC series electric flat cars is powered by the safety slide wire. Its working principle is to set up a trench on the side of the track, install a safe slide wire in the trench, and cover the trench with a single side hinged on the ground.
When the electric flat car is running, the cover plate is lifted by the trench turning plate device installed on the flat car, and the cable connected with the safety slip wire relay is arranged in the turning plate device. The track flat car can be put back to the ground automatically through the rear cover plate to ensure the smooth passage of the trackless vehicle. The trench overturning sliding contact type electric track flat car is not restricted by the running distance and will not affect the running speed of the electric flat car. It is flexible, safe and reliable, and has low failure rate. It is suitable for the selection of large tonnage and long distance transportation scheme. Use.
In addition, the safety slip contact line can also be installed on the ground, in the air (without affecting other modes of transport), so that installation is more convenient, and the cost is lower. It is a reasonable and economical conductive scheme of all electric flat car.
The main structure of KPC series electric flat car is frame, motor, reducer, wheel, cable, control box, sliding wire device.
1.Welded construction of structural steel
2.Lugs for securing loads ; Four steel wheels
3.Cable pendant controlled ; Brakes
4.Steel wheels; Steel deck
It can be used indoor or outdoor. The fields include metallurgy, foundry, new factory construction and shipbuilding and so on.
Specification Of KPC 30T Electric Flat Carriage
|table-board dimensions(mm)||Length L||3600||3600||4000||4500||5000||5600||6300||8000|
|wheel pair C(mm)||1435||1435||1435||1435||1435||1435||1435||1435|
|wheel base A(mm)||2000||2000||2200||2500||2800||3200||3600||4500|
|motor type||YZ 2.2||YZ 2.2||YZ 3.7||YZ 3.7||YZ 5.5||YZ 7.5||YZ 7.5||YZ 7.5×2|
|KPJ cable drum||AC380V||AC380V||AC380V|
|Reference weight (t)||2.2||2.5||3.2||4.3||5.7||8.3||10.2||22.5|
|Recommended the rail type||P24 YB222-63||P38 GB183-63||P43 GB182-63||P50GB181-63|
|Number of wheel/roller||4/2.2t||4/3.3t||4/5t||4/7.5t||4/11.5t||4/18t||4/27.5t||8/22.8t|