Small dimension, light dead weight. Compared with traditional cranes, the limiting distance is minimum from hook to wall, and headroom is the lowest, which makes cranes work more close to the front, and lifting height more higher that increases effective working space of workplace.Send InquiryChat Now
Brief introduction of European double girder overhead crane for workshop
Small dimension, light dead weight. Compared with traditional cranes, the limiting distance is minimum from hook to wall, and headroom is the lowest, which makes cranes work more close to the front, and lifting height more higher that increases effective working space of workplace.
They are applicable to the transfer, assembly, check and repair as well as load and unload at mechanic processing workshop, subsidiary workshop of metallurgical mills, warehouse, in light textiles or food industry. Advanced equipment and manufacturing shop is the guarantee.We are committed to produce the best quality products.
1. Design: Compact dimensions, low weight, easy to operate and easy to maintain, modular
design with direct fits between components
2. Motors: Crane uses sturdy cylindrical/ conical rotor pole-changing motors with elegant cont
inuous cast aluminum sections, integrated safety brakes insulation class F, IP54 protection.
3. Gear Boxes: Precision flat helical spur gear units in light alloy housings with case-hardened
gears, high-grade surface treatment and permanent oil/grease lubrication.
4. Brakes: Single/ Dual-disc electromagnetic DC brakes featuring automatic braking on power
failure. Environmentally sound brake linings designed for approx. 1 million braking operations
allow long maintenance intervals.
5. Electrical Panel: Modular design, covering a very wide operating range. The systems are
designed for ease of installation & maintenance and reliable operation, with fuse-less circuitry,
ducted wiring and non-screwed terminals. Each drive group is equipped with a motor overload
protection device to provide effective protection against inadmissible overloading.
6. Painting: Every component & part is thoroughly scrubbed & painted with two coats of primer
before assembly & two coats of synthetic enamel after testing.
7. Limit Switches : To prevent over hoisting & over lowering of hook.
8. Push Button Stations : Extra light, handy, easy to operate, aluminum, fabricated from ext
9. Soft Starts : Electric / Electronic soft start modules electrically coupled to the long travel
drives to achieve jerk free, cushioned & smooth starts.
10. Maintenance Platform With Hand Railing : Easy, simple and safe maintenance of the
crane extended partially or totally along the girder
|Type||European double girder overhead crane for workshop|
|Lifting Height (m)||6/9/12/15/18|
|Lifting Speed (m/min)||4/0.6||4/0.6||3.3/0.8||3.3/0.8||0~4||0~3|
|Lifting Motor (kw)||16/2.6||16/2.6||20/5||20/5||38||38|
|Traveling Motor (kw)||0.55*2||0.55*2||0.75*2||1.1*2||1.5*2||1.5*2|
|Wire Rope||Breaking |
|Lifting||2M / M5||1Am / M4||3M / M6||2M / M5||1Am / M4||2M / M5|
|Traveling||2M / M5||2M / M5||2M /M5||2M / M5||2M / M5||2M / M5|