The bridge frame of the single beam bridge crane runs along the track on both sides of the overhead frame. It can make full use of the space under the bridge frame to lift the material and not be hindered by the ground equipment. It is the most widely used and the largest number of lifting appliances.Send InquiryChat Now
The single girder bridge crane is a lifting equipment for lifting material across the workshop, warehouse and yard. Its ends are located on tall concrete columns or metal supports, shaped like bridges.
The bridge frame of the single beam bridge crane runs along the track on both sides of the overhead frame. It can make full use of the space under the bridge frame to lift the material and not be hindered by the ground equipment. It is the most widely used and the largest number of lifting appliances.
Single girder bridge crane is an important tool and equipment for realizing mechanization and automation of production process in modern industrial production and lifting transportation. So the single beam bridge crane is widely used in the departments and places such as industrial and mining enterprises, iron and steel chemical industry, railway traffic, port wharf and logistics turnover.
The safety devices：
overload limiter, height limiter, stroke limiter (limiting device), broken phase protection and so on.
1. Overload limiter
When lifting weight exceeds the specified rated weight, the lifting power source is cut off.
2. Height limiter and drop depth limiter
When the picking device is raised to the highest position, the lifting power source is automatically disconnected. When the extraction device drops to the lowest position, the descending power source is automatically cut off.
3, limiting device
The car traveling mechanism should set up a restricter and automatically cut off the power source when the stroke is limited.
4, the protection of the fault phase
Prevent the motor from being short of torque and prevent the wrong phase from causing the motor direction to go wrong.
5. Other safety devices
Cranes should be installed on the same track to prevent the two from colliding.
Setting up the safety protection of the conductive slide line, setting up the heat insulation device in the important parts such as the main flange and the flange plate.